Can I use this set up?
Posted: Wed Aug 24, 2011 2:50 amI would like to know if it's possible to use the front and rear spindle of a prelude 5 lug on my EG hb? Thanks
[/img]
[/img]Page 1 of 1
Posted: Wed Aug 24, 2011 2:50 amPosted: Wed Aug 24, 2011 3:11 ampreludes and accords have the same suspension setup I highly doubt you would be able use that the only thing i know that works on civics is integra and well civics
Posted: Wed Aug 24, 2011 3:20 amIt wont be a bolt up. I am sure you can use the parts with a little fabricating.
Will it be easy?
No.
Is it possible?
Possibly, however fabrication will be involved.
Will it be easy?
No.
Is it possible?
Possibly, however fabrication will be involved.
Posted: Wed Aug 24, 2011 4:29 amyou can deff use bits and pieces off of it as long as you know what you are doing. i know the secret but im pretty sure the in fo is very out there.
Posted: Wed Aug 24, 2011 7:48 amYes you can, My friend had a EG with Prelude hubs to run the 4 x 114 ITR rims and have rear disk.
Posted: Wed Aug 24, 2011 1:27 pmbut he's talking about the 5 lug setup.... they are worlds apart
Posted: Wed Aug 24, 2011 2:22 pmThanks I thought so. Ok I think I know the secret, press out the four lug and press in the five lug with the proper bearings. I think so, but thank for the info...