- Tue Feb 15, 2011 1:35 am
#238530
ok so i have been doing some looking online and found a rear disk upgrade using factory parts. it uses a rsx caliper braket, ep3 disk, and ep3 or rsx pads. but you use the factory calipers. the only problem i see is that the ep3/rsx pads are longer then the eg calipers.
so the question is has anyone done this upgrade, and if so can i use a ep3/rsx rear caliper insted of the eg. just so i dont have uneven wear on the pads and rotors.
so the question is has anyone done this upgrade, and if so can i use a ep3/rsx rear caliper insted of the eg. just so i dont have uneven wear on the pads and rotors.
your car is your story, dont let someone else write the book.
91 s10 (sold)
92 civic si with jdm b16a (Sold) http://civic-eg.com/viewtopic.php?t=13460
99 civic lx (current) viewtopic.php?f=63&t=30348
91 s10 (sold)
92 civic si with jdm b16a (Sold) http://civic-eg.com/viewtopic.php?t=13460
99 civic lx (current) viewtopic.php?f=63&t=30348