Calipers, Rotors, Pads, Lines & more- OEM and Aftermarket
User avatar
By 93hatcheg
#215684 im going to do all my brake lines in steel braided hose and wanted know if

-4AN is a sufficient size, this is the size im thinkning about running from the M/C to the prop valve, and from the prop valve to the connecting pionts on the brakes.

also what the difference between pro-lite hose and perform-O-flex hose??
User avatar
By teal_dx
#215720 I would run hard lines except for where the factory rubber hoses are. Replace those with braided stainless.

You don't want all braided stainless because it does slightly expand under hard braking. Nothing like a rubber line, but it is still going to give when comparing to the steel hard line.
User avatar
By 93hatcheg
#215947 damn thats gay! cause this stainless steel hard line a true pain in the ass to make custom lines! i was getting sooooo pissed i had to stop.

also do you know where i can get new ends to put on ( the ones that screw into the prop valve and such?