Calipers, Rotors, Pads, Lines & more- OEM and Aftermarket
User avatar
By melloball
#208023 I did a brake job today and when I was taking off 1 of the lug nuts, the bolt snapped in half. The lug bolts appear to be pounded through the back of the hub assm., and I loosened the bad 1 enough to realize there is a metal collar for lack of a better term in the way of it sliding out. I am wondering if anyone knows if I remove the center nut, the one Im assuming holds the wheel bearing, if the piece that holds the 4 lug bolts will come off. Any help with this, even if you only happen to know what Im likely to pay at a shop, is all very appreciated.
User avatar
By blk92hb
#208027 go to the web site at the bottom of the page
http://civic-eg.com/viewtopic.php?t=283
User avatar
By melloball
#208345 thank you sir
By dawg316
#209361 im doing mine this weekend, gonna take the easy aproach, of taking the brake disc off, cuttin the old lug off then hammering it out, grinding the head slightly on the new lug and trying to hammer it in from the back, not the most "perfessional" way of doing it but its better then pulling alot of shit off for 1 small lug stud. might take pics if any wants me to