Calipers, Rotors, Pads, Lines & more- OEM and Aftermarket
User avatar
By blk92hb
#198690 ok so im thinking about upgrading my brakes and im going to use ls/gsr rotors and calipers but what i need to know is will i be able to use abs rotors on a non abs si. if i cant then what is a good rotor to run. will i also be able to use a 14in rim on this set up or do i need a 15in rim

thnks for the help :thumb:
By dawg316
#198821 only diffrence between a abs and non abs disk should just be the abs gear ring on the back of the rotor, shouldnt be a problem but wait for some one else to chime in here with more info on the swap.
User avatar
By blk92hb
#202249 How much bigger are the rotors. Are they bigger in outer diameter or is it bigger where the wheel studs are. Thanks for the help
User avatar
By asianrob
#202250 from my understanding and this has been debated the 10.2 rotors (EX SI GS LS RS and GSR) are all the same the ABS sensor and ring are on the Axles them selves i know this because i have messed with this when i had my LS teg.

so YES you CAN USE ABS ROTORS on NON ABS cars (that has the same sized rotor). i have done it. and theres no difference
User avatar
By asianrob
#202352
blk92hb wrote:Right on thats all i needed thank you all for your help


anytime :thumb: