Calipers, Rotors, Pads, Lines & more- OEM and Aftermarket
User avatar
By ThisEarl
#185949 I, with not much experience, changed my front brakes a few weeks ago. I think i did everything fine but while I'm driving, not braking, there is a squeaking noise. When i apply the brake, it stops. HELP.

What did i do wrong and how do I fix it?

Thanks.
User avatar
By Ajax1989
#185950 what kinda pads did you use?

did u just get new pads? or rotors too?
or did the rotors get resurfaced
User avatar
By ThisEarl
#185952 I just got the cheap ones from AutoZone. Just the pads.
User avatar
By Ajax1989
#185953 thats prob ur problem.. when i went through my brakes class at school
my instructor said that cheap pads will squeak.. so maybe ur fine its just the shitty quality of the pads
User avatar
By ThisEarl
#185955 Even when I'm not braking?

Ill have to get better ones b/c that is annoying.
User avatar
By teal_dx
#185979 There's that special grease that you can put behind the pad to prevent the squeaking. It comes in little plastic packets and they usually have it up by the counter at autozone.
User avatar
By Sirk
#186039 yeah a bit of copper grease on the back of the pads normally works.
By chris86
#188040 have you put the anti squeel shims back on the replacement pads.i didnt and now mine sound like i have dying cats trapped behind my wheels.
User avatar
By ThisEarl
#188333 No I didnt use it...

Where do I put it on and how?

Like a thin layer?

Thanks again.
User avatar
By ThisEarl
#188428 When I was applying the grease, this is what i saw:

Image

This is what i get for being cheap or for being a shitty driver?

What causes this?
User avatar
By berg89
#188430 I buy the cheap ones to, but ive never had a problem like that. Are you hard on your brakes? I think the pads u got was just a poorly made one.
User avatar
By ThisEarl
#188587 I don't brake too hard at all, but anyway, i replaced them and put grease on the new ones.

They were still under warranty so i got my money back.


Thanks for everyones help.
User avatar
By Ajax1989
#188630
ThisEarl wrote:When I was applying the grease, this is what i saw:

Image

This is what i get for being cheap or for being a shitty driver?

What causes this?


thats the shitty quality pads for ya

good thing you caught this before it got worse