Page 1 of 1

da on my eg

PostPosted: Wed Jun 03, 2009 8:03 am
by Ajax1989
my buddy has a 91 da with lowering springs and shock

he is gettin a whole new suspension and he is givin me his old springs and shocks

will they fit on my 94 sedan??

PostPosted: Wed Jun 03, 2009 4:13 pm
by BLaCkSiLo
i'm not completely sure, but i do believe it's only the 94-01 integra's that bolt straight up (DC).

PostPosted: Wed Jun 03, 2009 5:45 pm
by Dippin_EG
my friend sold me his springs/struts on his EF for me to put on my DA. and it fit. then i took them off the DA to put on my EG. so, im pretty sure it will work.


The only thing that may NOT line up is where the brake line attaches to the strut

PostPosted: Wed Jun 03, 2009 8:05 pm
by MI_excoupe
As far as i know you are going to need the forks on the bottom of the strut from an EG.

PostPosted: Wed Jun 03, 2009 9:46 pm
by Ajax1989
ok cool

thanks guys :thumb:

PostPosted: Thu Jun 04, 2009 12:08 am
by Greasedmonkey
they will fit. they will not however lower your car the way you want it.

Here is a picture of my hatch with DA lowering springs.
Image
Image

sits higher in the rear. Da rear springs are taller than eg.

PostPosted: Thu Jun 04, 2009 12:21 am
by Ajax1989
oh i see, that doesnt look that bad

if they turn out like that i'll just chop the rear springs
to level it out :thumb:

PostPosted: Thu Jun 04, 2009 12:23 am
by Greasedmonkey
cut springs ride like shit.

PostPosted: Thu Jun 04, 2009 12:27 am
by Ajax1989
Greasedmonkey wrote:cut springs ride like shit.


oh, well if it looks like that, i'll just sell them for some eg springs
or trade