Page 1 of 1
EK Skunk2 Front Camber
Posted:
Mon May 11, 2009 2:43 pmby BLaCkSiLo
Hey guys, quick question, will an EK skunk2 front camber kit fit a EG? i know that we have to re-use our old bushings and UCA mount and the EK's dont.... are they interchangeable?
Thanks
Posted:
Mon May 11, 2009 4:19 pmby Greasedmonkey
you would need to use the WHOLE ek arm with bushings. You can not use any EG part at all for that.
Posted:
Mon May 11, 2009 7:13 pmby BLaCkSiLo
Greasedmonkey wrote:you would need to use the WHOLE ek arm with bushings. You can not use any EG part at all for that.
alright, thanks for that, i only ask cause my buddy has one for free...aren't they sold as the complete unit? i mean the EK strut tower and upper control arm are the same as the eg's right? along with the knuckles...
Posted:
Mon May 11, 2009 11:51 pmby Greasedmonkey
the eg and ek upper arms are not the same, they mount to the shock towers differently. you will need all the EK parts to use the EK arms.
Posted:
Tue May 12, 2009 2:34 pmby BLaCkSiLo
thanks man, i'm just gonna skip it, put my poly bushings my upper mounts and get the EG version