cv axle diy?
Posted: Tue Mar 03, 2009 11:45 pmI believe it is my cv axel that is clicking when I turn my wheels. How hard is it to remove it and install a new one. any diy?
Page 1 of 1
Posted: Tue Mar 03, 2009 11:45 pmPosted: Wed Mar 04, 2009 3:23 amhaynes manual is what you need.... if you got some tools, you'll be alright. took me bout 45 mins... mine was still the stock axle from the 95 teg donor that i'm pretty sure had never been changed cause it still had the "honda knuckle" thing on it, so it took a little persuasion to come out. once you get the nut off the end of the axle you'll be alright.
Posted: Wed Mar 04, 2009 3:47 amYes, it's not a difficult thing to do. Plus you can switch to a better gear oil for your tranny. 
I need to do mine. Both outside boots are torn. No clicking yet, but... they sure will soon.
I need to do mine. Both outside boots are torn. No clicking yet, but... they sure will soon.
Posted: Wed Mar 04, 2009 4:00 amimpact gun FTW. the shock fork thing is a b**** to take off but the rest is smooth sailing.