Page 1 of 1
Sway BArs! civic cx

Posted:
Tue Feb 24, 2009 6:02 pm
by The_richie_88
I have a civic cx and it does'nt come with any sway bar at all, just wondering would integra dc sway bars bolt right up? would i have to change my lower control arms? looking to put sways in the front and back
Thanks!

Posted:
Tue Feb 24, 2009 7:30 pm
by zeppelin101
You'll need LCAs both front and back off a car that came equipped with ARBs out the factory. After that yes, DC bars bolt in nicely

Posted:
Wed Feb 25, 2009 5:03 pm
by suspendedHatch
GSR front is 24mm but the back is only 13mm. So get the GSR front and an aftermarket rear swaybar. I recommend Progress either their 22mm or the 24mm adjustable.
Also get the Integra front lower tie bar while you're under there.
I think there is a 26mm Si front swaybar. Can't remember if it's the 96+ or not. But that's probably TOO stiff for the front. Stiffening the front increases understeer.