Civic EG

Posted: **Sat Nov 08, 2008 11:53 am**

good day!!

can anyone post pics of benen front lower tie bar installed in their
EG..
i dont know where or w/c part of the front under chasis should
i mount it..
at first i tried fitting it to the front LCA, it doesnt fit..
im getting confused..

any pics/ description is appreciated..

thnks!!

Posted: **Sat Nov 08, 2008 1:45 pm**

More than likely it goes in the back. Mounts at the same sport the LCA mount at.

Posted: **Sat Nov 08, 2008 5:37 pm**

babe he's talking about the front tie bar

Here's a picture

Posted: **Sat Nov 08, 2008 5:39 pm**

Readed owns me.

Either way, it still mounts where the LCAs mount....thats at least still the same.

Posted: **Sun Nov 09, 2008 5:15 am**

Jdm_Katie wrote:babe he's talking about the front tie bar
Here's a picture

im having trouble..
this is what i tot..
it cant fit on that lca bolt, its like
a little short, i was thinking of grinding the holes
so that it could be mounted on the lca bolt..
my friend told me that it benen logo should be facing the floor..

im really confused..

Posted: **Sun Nov 09, 2008 5:22 pm**

its a little short..the bolt? most likely need to replace the bolt with a bigger bolt or longer to get it to fit. The benen logo shouldn't be facing the ground..it will look exactly like how it does in the picture.

Posted: **Sun Nov 09, 2008 5:27 pm**

I figured they hung lower then that... i may look into getting one some time then... other stuff first though.

Posted: **Mon Nov 10, 2008 1:57 am**

if you put/fit the bar with the lca hole..
the bar's hole is not allign to the lca bolt hole..
im figuring the bar's hole is like a little short
to allign with the lca bolt hole..

ill try it this wed. ill ask a lift from my friends
working bay.. ill post some pics..

thanks for the help

Posted: **Mon Nov 10, 2008 2:01 am**

Is it not aligned with the front or back? Getting those lca lined is a pain because they arms are at an angle but the bolt is straight. I had to seperate mine fronm the rear portion and put it on half by half then rebolt them together when i did my ES bushings

Posted: **Mon Nov 10, 2008 4:41 am**

i think its alligned..
i already installed my rear lower tie bar..
its just this front lower tie bar im having issues with..
as if those lca bolts(the whole mount) were moved,
better yet the car is pressed on the
front goin down.. so it did moved therefore creating that
extra gap when i fit my benen..