Page 1 of 1

HELP

PostPosted: Sun Oct 26, 2008 12:18 pm
by EgCruiser
I need to fixe the angle off my rear wheels..
can anyone put out a picture off what part I need 2 buy?
both the wheels on my cars are

:?

here are a picture of the "angel" off the wheels
.The Yellow Lines are how the wheels are standing ..


Image :eh:

hmm

PostPosted: Sun Oct 26, 2008 12:26 pm
by EgCruiser
A frined of mine ordere a part like this.. but i :eh:
I cant think that this are going 2 fix the problem..
Image


Dont i have 2 change the parts like this??

Re: hmm

PostPosted: Sun Oct 26, 2008 12:33 pm
by EgCruiser
EgCruiser wrote:A frined of mine ordere a part like this.. but i :eh:
I cant think that this are going 2 fix the problem..
Image


Dont i have 2 change the parts like this??


Image

PostPosted: Sun Oct 26, 2008 3:05 pm
by ChicagoMike
That part your friend picked up will solve the problem. By adjusting the threaded part, it will pull the wheels straight up and down again.

PostPosted: Sun Oct 26, 2008 9:11 pm
by EgCruiser
Thanks for answering man :)
Now Im happy :D

PostPosted: Sun Oct 26, 2008 11:03 pm
by sdots
Good to see you happy, camber adjusters will solve your problem :) i had the problem on my front wheels, was dangerous at high speed, my gosh, never again

PostPosted: Sun Nov 02, 2008 9:11 am
by VegasCivic
install write up on this :thumb:

http://civic-eg.com/viewtopic.php?t=4090 not too hard.

This is the only part you will need to fully adjust. You already have an arm for toe. It is more forward on the rear trailing arm.

PostPosted: Mon Nov 03, 2008 1:48 am
by jmsplitfyre
Wow, that is weird that your wheels are like that. It is true that a camber kit will help you with that problem. I don't have mine yet since I don't even have my decent suspension set-up, but I'm only putting a camber kit up the fronts.

Goodluck on solving your dilemma bro! :thumb:

PostPosted: Mon Nov 03, 2008 2:46 am
by VegasCivic
jmsplitfyre wrote:Wow, that is weird that your wheels are like that. It is true that a camber kit will help you with that problem. I don't have mine yet since I don't even have my decent suspension set-up, but I'm only putting a camber kit up the fronts.

Goodluck on solving your dilemma bro! :thumb:


Washers on the bolts work fine for the rear too . Fronts kits are normally a must.