Page 1 of 2

I want to be slammed!

PostPosted: Thu Aug 21, 2008 4:27 am
by CivicEG
OK I want to be slammed, but not to much I want a better look for the EG... I have some Ebay coil over and the rear SSR camber kit and the front skunk 2 camber kit as well. I want to take them off and I think this will allow the car to sit lower than usual... with a gangster lean yo lol.

PostPosted: Thu Aug 21, 2008 4:25 pm
by Grat
so are u asking what suspension u should run if u wanna slam it? or if u should take off the camber kit or not?

PostPosted: Thu Aug 21, 2008 4:31 pm
by a_CoUpE
keep your camber kit and save some tire
and just lower your damn coils all the way.

PostPosted: Thu Aug 21, 2008 4:58 pm
by sdots
a_CoUpE wrote:keep your camber kit and save some tire
and just lower your damn coils all the way.


x2

PostPosted: Thu Aug 21, 2008 6:29 pm
by Benj
i think what he wants is the hardcore camber look but to still be able to go places

PostPosted: Thu Aug 21, 2008 11:36 pm
by Greasedmonkey
ilmcrx wrote:i think what he wants is the hardcore camber look but to still be able to go places



That doesnt happen. Hardcore camber comes from being hella low, which means not going anywhere that doesnt have smooth roads.

PostPosted: Tue Aug 26, 2008 4:38 am
by CivicEG
ilmcrx wrote:i think what he wants is the hardcore camber look but to still be able to go places


I want something slamed, but not to the point of no return if you know what I mean... I wan t to look like this ----> ( should I take the camber kit of...?)

Image

Image


[/img]

PostPosted: Tue Aug 26, 2008 5:45 am
by Benj
sick but those mud flaps are like an inch off the ground

PostPosted: Wed Aug 27, 2008 4:38 pm
by Vti93T
Keep your camber kit..it will help being slammed..because if you don't have it you are going to be rubbing hella tire..trust me..with out my camber kit I wouldn't be able to go as low as I am now in the rear. Some people say you can't be that low and run a camber kit but it's actually better..But what I'm going to do with my coupe is roll everything under the front and rear because when I hit a bump my camber kit in the front hits the body of the car and it sounds like crap..it's probably cause I also need to replace my shocks lol..but yeah keep the camber kit..that will help you in the long run

PostPosted: Thu Aug 28, 2008 4:30 am
by CivicEG
More info...?

PostPosted: Thu Aug 28, 2008 4:35 am
by CivicEG
Jdm_Katie wrote:Keep your camber kit..it will help being slammed..because if you don't have it you are going to be rubbing hella tire..trust me..with out my camber kit I wouldn't be able to go as low as I am now in the rear. Some people say you can't be that low and run a camber kit but it's actually better..But what I'm going to do with my coupe is roll everything under the front and rear because when I hit a bump my camber kit in the front hits the body of the car and it sounds like crap..it's probably cause I also need to replace my shocks lol..but yeah keep the camber kit..that will help you in the long run


Ok so how do I make it look like the picture... btw I have coilovers.

PostPosted: Thu Aug 28, 2008 12:42 pm
by 0p71mu5pr1m3
In the picture that car has negative camber in the rear, and without a proper camber kit you're not really going to be able to achieve that. And also take note that the only reason he has the camber is because he's so low he would likely scrape otherwise. I myself am lowered about 2 inches or so on Koni-Yellow shocks and Skunk2 Lowering Springs but don't have a camber kit or any major camber adjustment for that matter because my tires don't rub, but I'm as low as I really want to go. Most people would agree that slamming your car to the ground actually takes away from it's handling ability, so if you're really just going for looks then I guess slamming it's okay, but if you want to handle well just get a good suspension setup and lower it around 2 inches.

For starters get rid of the ebay coilovers. The spring rates on those are probably crap and if you go that low the car will likely bounce causing you to rub an unpleasant amount. Either purchase a set of full coilovers I.E. something like form and functions, or a sleeve setup like Ground Controls over Koni-Yellows. Once you have a good trustworthy suspension, get the car to a ride height you want and take the car to a shop that knows what they're doing and have them do a suitable alignment to your setup. Without the camber kit they won't be able to adjust the rear camber much, so leave the kit on. That's the best I can help you at this point. Good luck, and do it right the first time.

PostPosted: Thu Aug 28, 2008 9:39 pm
by CivicEG
0p71mu5pr1m3 wrote:In the picture that car has negative camber in the rear, and without a proper camber kit you're not really going to be able to achieve that. And also take note that the only reason he has the camber is because he's so low he would likely scrape otherwise. I myself am lowered about 2 inches or so on Koni-Yellow shocks and Skunk2 Lowering Springs but don't have a camber kit or any major camber adjustment for that matter because my tires don't rub, but I'm as low as I really want to go. Most people would agree that slamming your car to the ground actually takes away from it's handling ability, so if you're really just going for looks then I guess slamming it's okay, but if you want to handle well just get a good suspension setup and lower it around 2 inches.

For starters get rid of the ebay coilovers. The spring rates on those are probably crap and if you go that low the car will likely bounce causing you to rub an unpleasant amount. Either purchase a set of full coilovers I.E. something like form and functions, or a sleeve setup like Ground Controls over Koni-Yellows. Once you have a good trustworthy suspension, get the car to a ride height you want and take the car to a shop that knows what they're doing and have them do a suitable alignment to your setup. Without the camber kit they won't be able to adjust the rear camber much, so leave the kit on. That's the best I can help you at this point. Good luck, and do it right the first time.


Thanks

PostPosted: Sat Aug 30, 2008 8:38 pm
by Vti93T
yeah exactly what he said..just gotta get a camber kit front and rear is like $250..and then just adjust the back to however much camber you wanna run. then it will look like the hatch in the pictures above..I am currently 2 degrees of negative camber in the rear..when I had my other rims on I was probably like 5 or 6 lol maybe more.

PostPosted: Sat Aug 30, 2008 11:56 pm
by Greasedmonkey
Jdm_Katie wrote:yeah exactly what he said..just gotta get a camber kit front and rear is like $250..and then just adjust the back to however much camber you wanna run. then it will look like the hatch in the pictures above..I am currently 2 degrees of negative camber in the rear..when I had my other rims on I was probably like 5 or 6 lol maybe more.


you are a brace girl!! how low are you an what does that look like on your coupe? Ive never had to add camber to be hella low. When i put my ksports on my other hatch, i had them all the way down and still didnt rub anywhere.