Civic EG

Posted: **Sat May 10, 2008 6:00 pm**

What do you need to buy to get a Teg rear stabilizer bar setup?

please let me know prices, parts to get and maybe where from? i know this has been asked millions of times but im new to the EG scene!

Thanks lads

Dan

Posted: **Sat May 10, 2008 7:06 pm**

you need..

5,6,12,13,16,19,10,7, 33 x 2, 36x2,8,11, 46 x 2, 42x2

basically endlinks, bolts, d bracket mounts/ sway bar and lower control arm with swaybar mounts.

Posted: **Sat May 10, 2008 9:35 pm**

ooo looks very pricey!!

i think im just gonna have to get the car running right before i go mad on it! but from what ive heard it handles like a dream.

cheers for the time to show me mate, thanks

:thumb:

Posted: **Sat May 10, 2008 10:56 pm**

Sign up on www.itr-dc2.com and PM integrastella

Posted: **Sat May 10, 2008 11:59 pm**

Graham wrote:Sign up on www.itr-dc2.com and PM integrastella

I would second that, I got a lot of stuff off Andy, really sound guy.

Posted: **Sun May 11, 2008 5:14 pm**

how much did a used set up cost you lads?

Posted: **Sun May 11, 2008 10:02 pm**

Ive not bought one yet but id think about £50, thats what id aim to pay anyway!

Andy will do them for a good price, never had any trouble with anything ive got from him!

Posted: **Sun May 11, 2008 10:24 pm**

dannyboyhonda wrote:how much did a used set up cost you lads?

I think I got mine of Andy for £40, can't remember bought it a while back.

Posted: **Mon May 12, 2008 8:32 am**

I'd 3rd that Andy's always got loads of toys in and at good prices

Posted: **Wed May 21, 2008 11:43 am**

Just out of curiosity, would it be okay to run a 23mm rear ARB on an eg, without an ASR brace etc?

Posted: **Thu May 22, 2008 10:36 am**

http://www.knology.net/~jediklc/partnumbers.htm

try this its got the parts no for it but the itr sway bar is the dc2 in 20mm and all these parts are for eg i believe.

Posted: **Thu May 22, 2008 6:27 pm**

Graham wrote:Just out of curiosity, would it be okay to run a 23mm rear ARB on an eg, without an ASR brace etc?

dont even try.

Unless you use a BSQ kit or Beaks Kit, i would not recommend tearing your subframe :thumb:

Posted: **Thu May 22, 2008 11:52 pm**

Uh oh

I was hoping i wouldn't have to, i thought it was only ek's that had problems with subframes getting ripped to bits?

Posted: **Fri May 23, 2008 12:22 am**

well i had an ls sway bar on my car 13mm i believe it was all i needed was the sway bar the end links went to orchard to buy the bolts, nuts and washers and i needed rear lower control arms with sway bar holes to bolt up the end links and it made a world of a difference

Posted: **Fri May 23, 2008 12:50 am**

Yeah i ordered up all the bolts and brackets from Honda so in theory i have everything to fit it now, but im not going to fit it if there's a chance it will damage my subframe :cry:

Civic EG

Teg rear stabilizer bar to an EG?

Teg rear stabilizer bar to an EG?