Civic EG

Posted: **Sun Oct 04, 2015 4:45 am**

So I'm replacing my tie rod ends, when I opened the package on the new ones I noticed there is a washer type piece that has 2 prongs on the end of one side. When I removed the old one it did not have the said washer. My questions are, is it needed and would it cause excessive play in the steering if it isn't installed

I know these sound like dumb questions but I am unsure since the old don't have them.

Posted: **Sun Oct 04, 2015 3:02 pm**

Can you take a picture of what you have?

Posted: **Wed Oct 07, 2015 3:59 am**

Posted: **Wed Oct 07, 2015 2:02 pm**

That would be the lock washer for the nut. Its need to maintain the nut in place.
Yes , needed.

Posted: **Wed Oct 07, 2015 10:32 pm**

Awesome thanks for all the relpies

Civic EG

inner tie rod end

inner tie rod end

Re: inner tie rod end

Re: inner tie rod end

Re: inner tie rod end

Re: inner tie rod end