Civic EG

Hi

Wonder if anyone can help I looked at the DIY thread on power steering delete but mine is different.

Instead three ports I only have 2 ports so do I need to look just those two? My car is UK eg6 vti left hand drive

Any advice would be great

Thanks

Killer,
Can you post some pic's. Much easier to see what you want to do with a picture.
Thanks.

Yes a pic would help. you will also want to vent the rack, so we'll help you figure something out.

Okay how you upload pics on here I tried but get th to upload

Im doing this on my iPhone so mite be why..

You got email address and I can send pics [/img]

host the photo on photobucket or something first.

get img code and post

Okay here pic

Can see in middle there only 2 lines

http://i284.photobucket.com/albums/ll40 ... f4jwdp.jpg

If you only have 2 lines, it's possible you have in integra rack swapped (or that's what the VTi has from the factory- not sure, as we never had VTi in the US.)


Here's a looped integra rack, just connect the two together. However, a vent should be added to make the steering easier, so you're not fighting the pressure.

For adding a vent, you could get a T splitter, then add a long hose with a small filter on the end.

Like this:


Plus this:

Sweet awesome thanks so much !!