Civic-EG.com Forum 3.3.1

- Fri Feb 21, 2014 2:44 pm #342916 cx eg knuckles are different then ex and si knuckles. cx front right knuckle is a 51210-SR3-000 and the si front right is 51210-SR3-N10. the difference is the bearing size is bigger on the 51210-SR3-N10 "si" knuckles. also the calapier are bigger on the ex,si, and i believe dx.
the knuckles on a 1994 ls integra and gsr are both 51210-SR3-N10. which are the same as the si, ex. here is list of the knuckles

hatch
cx
51210-SR3-000
dx-auto
51210-SR3-000
dx
51210-SR3-000
si
51210-SR3-N10
si-abs
51210-SR3-N10

coupe
dx-auto
51210-SR3-000
EX-4 speed auto
51210-SR3-N10
EX 5 speed manuel
51210-SR3-N10
EX 4 speed auto abs
51210-SR3-N10
EX 5 speed manuel abs
51210-SR3-N10

- Fri Feb 21, 2014 3:03 pm #342917 also a list of integra spindles

94 ls
51210-SR3-N10
gs
51210-SR3-N10
gsr
51210-SR3-N10

97 itr
51210-SR3-N10

2000
ls
51210-SR3-N10
gs
51210-SR3-N10
gsr
51210-SR3-N10
itr
51210-SR3-N10

all of the wheel bearings for the 51210-sr3-n10 are the same. bearing number 44300-S5A-004 (koyo seiko) or 44300-s5a-008 (ntn). no difference in bearing other then who honda had make them. same i.d. and o.d.

if you want to do 5 lug for the front all you will need is a 44600-ST7-R00 hub. everthing else on the front is the same. the rear trailing arms are way different part number wish.

- Wed Mar 05, 2014 5:56 pm #343184 hope that helps and clears up some things lol