Civic EG

Posted: **Thu Nov 21, 2013 6:44 am**

ok here is the deal .. there is camber in back for sho ! so im kinda wanna know how many washer to set my camber back before i do alighment this week

i would like to know size of the bolt and washer also .. thanks in advance

here is the pic

its hard to tell right now .. 2 on each bolt ?

Posted: **Thu Nov 21, 2013 2:06 pm**

I've done 2 on each bolt before - worked perfect. I don't recall the size though. You'll have to measure the size of the bolt and then go to the washer isle at the hardware store and buy some in that size. :thumb:

Posted: **Thu Nov 21, 2013 2:19 pm**

teal_dx wrote:I've done 2 on each bolt before - worked perfect. I don't recall the size though. You'll have to measure the size of the bolt and then go to the washer isle at the hardware store and buy some in that size.

ok !

Posted: **Thu Nov 21, 2013 7:58 pm**

Bolt is a M10x1.25x30. So you will need 10mm washers

Posted: **Thu Nov 21, 2013 9:26 pm**

So if I use 2 washer on each bolt .. Should I get a new bolt or re use the oem one ? Imma trying to find class 10 bolt for it soon if I do need it

Posted: **Thu Nov 21, 2013 9:52 pm**

They say 2 washers per bolt is the max before having to buy a longer bolt.

Posted: **Fri Nov 22, 2013 3:03 am**

What kinda washer tho ? Galvanize ? Or just regular steel washer ?

Posted: **Fri Nov 22, 2013 4:42 am**

Washer type shouldnt matter.

Posted: **Fri Nov 22, 2013 4:48 am**

okie dokie ! :thumb:

Civic EG

Washer trick

Washer trick