Civic-EG.com Forum 3.3.1

- Thu Nov 21, 2013 6:44 am #339132 ok here is the deal .. there is camber in back for sho ! so im kinda wanna know how many washer to set my camber back before i do alighment this week

i would like to know size of the bolt and washer also .. thanks in advance


here is the pic



its hard to tell right now .. 2 on each bolt ?

[teal_dx]

- Thu Nov 21, 2013 2:06 pm #339151 I've done 2 on each bolt before - worked perfect. I don't recall the size though. You'll have to measure the size of the bolt and then go to the washer isle at the hardware store and buy some in that size.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Thu Nov 21, 2013 2:19 pm #339153

I've done 2 on each bolt before - worked perfect. I don't recall the size though. You'll have to measure the size of the bolt and then go to the washer isle at the hardware store and buy some in that size.

ok !

- Thu Nov 21, 2013 7:58 pm #339172 Bolt is a M10x1.25x30. So you will need 10mm washers

1992 Honda Civic SIR-S

- Thu Nov 21, 2013 9:26 pm #339177 So if I use 2 washer on each bolt .. Should I get a new bolt or re use the oem one ? Imma trying to find class 10 bolt for it soon if I do need it

[teal_dx]

- Thu Nov 21, 2013 9:52 pm #339178 They say 2 washers per bolt is the max before having to buy a longer bolt.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Fri Nov 22, 2013 3:03 am #339192 What kinda washer tho ? Galvanize ? Or just regular steel washer ?

- Fri Nov 22, 2013 4:42 am #339199 Washer type shouldnt matter.

1992 Honda Civic SIR-S

- Fri Nov 22, 2013 4:48 am #339200 okie dokie !