Civic-EG.com Forum 3.3.1

- Fri Aug 30, 2013 2:39 pm #336143 Any one has any ideas on what I can use to increase the height of my suspension to about an inch. I have skunk 2 drop low springs.

- Fri Aug 30, 2013 3:18 pm #336146 Only lowering springs right? You might need a set that has a less drop

- Fri Aug 30, 2013 6:32 pm #336152 What about spacers/risers because I like how the bounce is on the skunk 2. Has any one ever encountered spacers before.

[teal_dx]

- Fri Aug 30, 2013 7:29 pm #336156 I would get a set of coil over sleeves/springs; the kind that go over your current shock/strut. (Assuming you already have some aftermarket ones)
That way you can fine tune the ride height.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Fri Aug 30, 2013 11:10 pm #336169

I would get a set of coil over sleeves/springs; the kind that go over your current shock/strut. (Assuming you already have some aftermarket ones)
That way you can fine tune the ride height.

This is exactly what I did before I got my skunk 2s.

- Sat Aug 31, 2013 3:43 am #336177 Yes I do have some after market one's. Wouldn't that affect the angle of the spring.