Springs, Struts, Swaybars, Bushings, Tower Braces & more
User avatar
By Trix
#328199 it just wont budge at all, went to my grandpas work, and he gave me a 1/2 inch socket and i tried that with my 17mm and still wont work, so he is off tomorrow so he will bring home a cheater or well find one lol
By HeikDiesel
#328203 That thing shouldn't be that tight. Slip the handle for your jack over the ratchet and use that for leverage. Make sure all of that cotter pin is out. Looks like you are making good progress :thumb:
By rustyrex
#328204 Make sure all of the cotter pin is out. I didnt notice a small piece broke off and thats how i messed my ball joints up. also hit the threads with a wire brush.
User avatar
By Trix
#328219 cotter pin is all the way out, and i cant use my jack handle due to the little bar inside of it, that releases the air from the jack to lower the car
User avatar
By Trix
#328267 sweet guys thanks for the help its replaced and back on the ground all tightened up and ready for the drive to work tomorrow