Civic EG

hey everyone,

ok i done some research but couldn't find an answer.
my problem is:

-my coilovers dont have a locking collar located at the far bottom of the coilovers thread (pic below)

- is there a way i can lower it abit more (still looks stock height)

- if i loosen the 2 collars the spring will become loose and flop around, should i get spacers ontop of the spring or just buy new coilovers alltogether?

heres pic:


thanks for your help in advance

the brand is GAB HA series

Noticed there was no bottom bottom collar. Use to my f&fj

but isnt that the locking collar? if i lower just that one the top one will unthread and be very unsafe

i thought they are meant to be locked tightly together

yeah, that is the locking collar. you would move both collars down the threads to change your ride height. however if you go too low you'll have a gap between the top of the spring and the top mount when you lift the car on a jack. if you dont want any spring gap, or your traffic laws dont allow it, look into getting helper springs.

they look like these. they are a very light compression spring, that will compress almost entirely when the car isnt on a lift or stands.
usually you have to buy the springs individually and then buy the spacers for them.

AHA! ^^ million dollar answer!!!

thanks a ton, your a legend