Civic-EG.com Forum 3.3.1

- Tue Dec 13, 2011 9:51 am #285187 before I buy replacement parts, am I right in thinking the front wishbone parts on a standard EG3 dont have the holes to take an ARB?

I havent had a chance to get under and have a look and someone has some that I can buy if I need to replace them

- Wed Dec 14, 2011 2:21 am #285330 if there are holes there you can get the the sway bar and swap it in with new endlinks and etc...

but since i think your EG3 is equivalent to our DX im thinking you dont have it.

any EG6/8/EJ with front sway bar will bolt on with their control arms. i think you can order the front control arms from 1Aauto but i dont know how much it would cost to ship that out to you. i would order those and new end links. just make sure you get the right ones.

you can also snatch them off an 94+ integra.

92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe

- Wed Dec 14, 2011 6:17 am #285368 you can get the whole sway bar and endlinks here for $115 plus shipping from JSH motors. they just got a new shipment in from japan.


http://www.jshmotors.com/jdm-honda-civic-eg6-sir-front-sway-bar_p45.php

1993 Civic CX
Build Thread
http://civic-eg.com/viewtopic.php?t=20137

- Wed Dec 14, 2011 8:58 am #285375 your right mine is a DX, I can get the arms for £20 so Ill get those and the ITR sway bar after

Cheers guys