- Wed Mar 02, 2011 2:22 pm
#241805
Hi all I was at the junkyard and noticed a 93 civic ex sedan had a rear sway bar which looked oem (not sure if Honda made oem rear sway bar) but I was wondering if it will fit in my civic coupe thanks guys
- Wed Mar 02, 2011 2:34 pm
#241807
Should have no isses there. I have an integra front and rear in my ej2
- Wed Mar 02, 2011 2:38 pm
#241808
Thanks should I swap out control arms to make this just a one trip to the junkyard.
- Wed Mar 02, 2011 3:12 pm
#241812
You will need the right half for a front sway bar install http://www.google.ca/imgres?imgurl=http ... 29,r:9,s:0
Stock rear on top integra on bottom
http://www.google.ca/imgres?imgurl=http ... 74&bih=483
Stock rear on top integra on bottom
http://www.google.ca/imgres?imgurl=http ... 74&bih=483
- Thu Mar 03, 2011 1:10 am
#241898
the sway bars will fit get the lower control arms to go with it so you will have the mounting spots for them and dont for get the SB brackets too.
92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe
- Thu Mar 03, 2011 2:15 pm
#241990
Cool thanks asianrob