Springs, Struts, Swaybars, Bushings, Tower Braces & more
User avatar
By Greasedmonkey
#212574 Some people wanted to know what the stock sizes were for the sway bars for our EGs. I looked around and found out these sizes. If you dont agree, post up proof of what you disput. I will then change it.

Front:
1992-1995 Civic Si: 21mm
1992-1995 Civic EX: 21mm
1994-1997 del Sol DOHC: 24mm
1996-2000 Civic EX: 22mm
1996-2000 Civic HX: 22mm
1999-2000 Civic Si: 26mm
1997-2000 Civic Type R: 26mm
1994-2001 Integra LS: 22mm
1994-2001 Integra GSR: 24mm
1996-2001 Integra Type R: 24mm

Rear:
1992-1995 Civic EX: 13mm (when equipped)
1994-1997 del Sol DOHC: 15mm
1999-2000 Civic Si: 13mm
1997-2000 Civic Type R: 22mm
1994-1999 Integra LS: 13mm
2000-2001 Integra LS: 14mm
1994-2001 Integra GSR: 14mm
1996-2001 Integra Type R: 23mm (JDM) 22mm (USDM)
User avatar
By Ajax1989
#224196 so im gonna take it the lx sedan is the same size as the ex/si??

and wat about the 91 DA rear swaybar do you know what size it is?
By EJ1STYLEN
#224779 So can i put a 24mm sway bar from a 94 integra gsr onto my 94 civic ferio?
User avatar
By asianrob
#224794
EJ1STYLEN wrote:So can i put a 24mm sway bar from a 94 integra gsr onto my 94 civic ferio?


everything swaps in but the end links are different from the NON GSR/Type R
IIRC
User avatar
By That One Dude
#224859 You can put it in. The only difference between the GSR/GS end links and the LS/ITR end links it that the GSR/GS end links are more or less ball joint style. They will bolt straight to the front LCAs on the Civic.
By EJ1STYLEN
#224981 Ok I'm kinda confuse, I could use the 94 gsr sway bar but not use the gsr end link? Or I could use. The gsr end links too?
User avatar
By That One Dude
#224982 The GSR sway bar will bolt straight up. No issues.
User avatar
By OleFolk
#256770 Will a crx front sway bar fit on an eg?
User avatar
By Eg6H2D
#259020
OleFolk wrote:Will a crx front sway bar fit on an eg?


Nope itll fit a DA and vice versa.. EG and DC are at most compatible in every possible way!! interchangeable parts..
User avatar
By Ajax1989
#259023
EG6b20R wrote:
OleFolk wrote:Will a crx front sway bar fit on an eg?


Nope itll fit a DA and vice versa.. EG and DC are at most compatible in every possible way!! interchangeable parts..


your correct sir!


and if anyone asks the rear ef/da bars fit the eg, wit the eg mounts tho
a ef/da sway bar on my car

pic
Image
By EJ1STYLEN
#280917 Can a ej coupe sway bar fit the 4dr eg? Guy on cl selling one of a en coupe for 60 links and all.
User avatar
By Greasedmonkey
#280949 yes
By JohnRM
#282258 I'm about to get both front and rear 94 LS swaybars. Would I also need the 94 LS integra endlinks and LCA's?

This is going into a 93 EG sedan :D