Springs, Struts, Swaybars, Bushings, Tower Braces & more
User avatar
By jb-b16b-ej1
#212498 i have recently bought a set of skunk 2 pro cs a asr brace asr 24mm sway bar and function 7 lcas i was wondering if anybody had this set up and i was wanting to know how harsh the ride is i can put up with a pretty bumpy ride and the roads aint to bad in tennessee but i was wantin somebodys opinion on it
By AutoXCivic
#212550 Since a harsh ride is subjective you are just going to have to put the parts on and find out for yourself. Some stock suspensions are "too harsh" for some people. Others don't mind 12k springs, it's all what you can handle.

The sway bar won't make the ride any harsher, so no worries there. The springs will make it rougher, but how much will depend on how much stiffer they are than your current set up, however it will be possible to dial a little of that out with the adjustable Pro-C shocks. The LCAs will make the biggest difference because of the harder bushings in them, going from stock rubber bushings to poly or hard rubber bushings give you a lot more road feel.
User avatar
By Chance
#212560 It'll be a pretty good ride. It shouldn't be to rough. :thumb:
Last edited by Chance on Tue Sep 14, 2010 2:54 pm, edited 1 time in total.
User avatar
By jb-b16b-ej1
#213485 thanks im gonna put it all on after i get done with paint this weekend