Civic-EG.com Forum 3.3.1

- Fri May 28, 2010 9:06 pm #197522 Yup. That's what charles, the owner of asr runs on his 2008 civic sedan. 26mm hollow.

BoRIcuA y QUE!

- Sat May 29, 2010 1:21 am #197558

ASR 24mm Rear set up with brace is awesome they also have a 32mm hollow bar set up for seriousness.

the 24mm ASR swar bar and brace set up is roughly 400 US dollars.

check it out.

http://www.jhpusa.com/store/pc/viewPrd. ... tegory=357

Or you could get the beaks ITR kit for the EG ... I think that's a 22mm rear. It's only like $220.

http://www.beaksproducts.com/EG_Quick_Swap.htm

Straight lines are for sissies.

- Sat May 29, 2010 1:47 am #197560 I had the beaks tie bar and to tell you the truth, that thing doesn't seem like it stops anything from reaping off. It being made out of 3 piece like it is, doesn't seem sturdy nor rigid. To me it was more for looks.

BoRIcuA y QUE!

- Sat May 29, 2010 2:28 pm #197619 There's no tie bar in that link, just the brace bits, and the sway bar ... which is the part that matters.

And I've never heard of any problems with the bracing that they provide.

Straight lines are for sissies.

- Sun Jun 20, 2010 1:57 pm #201236 wots involved in fitted a oem integra anti roll bar 2 a eg hatch? wot exactly do i need? obv the roll bar and drop links, anything else? thanks

- Sun Jun 20, 2010 4:20 pm #201254

wots involved in fitted a oem integra anti roll bar 2 a eg hatch? wot exactly do i need? obv the roll bar and drop links, anything else? thanks

Endlinks, sway bar, d brackets and subframe brackets.

BoRIcuA y QUE!