Page 1 of 1

wheel not centered in wheel well

PostPosted: Thu Oct 15, 2009 11:36 am
by projecthonda
Image

pic from H-T

front lower control arm is replaced but still the same

any ideas for other parts to replace? spindle? upper arm? shocks?

PostPosted: Thu Oct 15, 2009 1:18 pm
by teal_dx
the frame or subframe is likely bent from a previous accident. notice how poorly the bumper/fender headlight is aligned... that also points to previous damage. :eh:

PostPosted: Thu Oct 15, 2009 1:45 pm
by 3kkl3sia
that must have been one hell of a accident to mess it up that bad.

PostPosted: Fri Oct 16, 2009 2:46 am
by projecthonda
the picture above is not my car, i just borrowed it from HT

mine is a bit different, no major accident whatsoever

my culprit is a bent lower suspension arm

Image

Image

hopefully it will fix the problem

OT:

nice to be back

PostPosted: Fri Oct 16, 2009 3:14 am
by teal_dx
good I hope that is the only part that is bent, looks to be a simple fix :thumb:

welcome back!! :)

PostPosted: Fri Oct 16, 2009 4:15 am
by Greasedmonkey
The circled part is one good idea. It could also be the spindle too.