Page 1 of 1
Posted:
Sun Sep 07, 2008 3:42 pmby defjamon26z
you install the ground wire on the value cover. that really isnt gonna help anything at all. dont you know you got a gasket between the valve cover and the motor? hahahaha
have that wire install to the metal on the power steering pump.
Posted:
Wed Oct 15, 2008 5:08 pmby mooze
i wanted to build a floor but my box is to big. nice install
Posted:
Wed Oct 15, 2008 6:15 pmby tigerafro
whats the rockford thing for ?
Posted:
Wed Oct 15, 2008 7:25 pmby teal_dx
defjamon26z wrote:you install the ground wire on the value cover. that really isnt gonna help anything at all. dont you know you got a gasket between the valve cover and the motor? hahahaha
The wire goes to the bolt which goes direcly to the Head = good ground
It's above the rubber insulator so it is not even touching the valve cover.
Posted:
Wed Oct 15, 2008 7:36 pmby sdots
Nice install man, not too keen on the door speaker covers though, would of left them as they are.
Posted:
Sun Oct 19, 2008 12:02 amby Macster
The trunk layout is hella sick i will have to do that to mine i dont have a spare tire cover as is.
Posted:
Fri Oct 31, 2008 4:05 pmby mooze
tigerafro wrote:whats the rockford thing for ?
its a fuse
Posted:
Fri Dec 26, 2008 5:37 amby teal_dx
I love the false floor in the trunk
Posted:
Fri Dec 26, 2008 6:59 amby trustdestruction
defjamon26z wrote:you install the ground wire on the value cover. that really isnt gonna help anything at all. dont you know you got a gasket between the valve cover and the motor? hahahaha
i hope you're not serious...
The ring terminal is between the metal grommet washer and the nut. The nut is screwed onto a valve cover stud and it bolted into the head.
It wouldn't come bolted that way from the factory (which it does) if it didn't work.
Posted:
Mon Dec 29, 2008 5:24 pmby xswingkidx
trunk setup looks great!
Posted:
Mon Dec 29, 2008 10:43 pmby BLACKS' COUPE
i got a quick question as in regards on your pattern. Can you help me get a clean pattern by giving me your secret on yours? what did you use to cut the wood to specs? any tracing?
Posted:
Mon Dec 29, 2008 10:58 pmby sqsi
BLACKS' COUPE wrote:i got a quick question as in regards on your pattern. Can you help me get a clean pattern by giving me your secret on yours? what did you use to cut the wood to specs? any tracing?
For my hatch I took out the carpet and traced it onto the wood, not sure if that how this one was done.
Posted:
Mon Dec 29, 2008 10:59 pmby sqsi
Nice choice in equipment, gotta love sound quality
Posted:
Mon Dec 29, 2008 11:00 pmby BLACKS' COUPE
thats what i had planned but i'm missing my trunk carpet due to last owner taking it out and decided to leave it naked..
Posted:
Tue Dec 30, 2008 12:09 amby sqsi
bummer