- Mon Jul 23, 2012 4:06 pm
#311716
car: 94 Civic Si 5 speed
I know what you guys think about installing a remote start on a 5 speed. But I'm installing a magnetic ground switch on the shifter like what causeofalarm put on his website.
I have a Code alarm 671 and i'm trying to install this one wire (External start trigger) but I don't know where to connect it. I tried searching but it gives me the run around on the internet.
This is what is says for the wire:
NOTE: The following connection is only required on a REMOTE START installation.
-This wire will activate the Remote Start when a GROUND pulse is applied to it from an external device.
I know what you guys think about installing a remote start on a 5 speed. But I'm installing a magnetic ground switch on the shifter like what causeofalarm put on his website.
I have a Code alarm 671 and i'm trying to install this one wire (External start trigger) but I don't know where to connect it. I tried searching but it gives me the run around on the internet.
This is what is says for the wire:
NOTE: The following connection is only required on a REMOTE START installation.
-This wire will activate the Remote Start when a GROUND pulse is applied to it from an external device.
94' civic si
JDM B16A w/AC
My daily driver: http://tiny.cc/3bdut
K3 GSXR 1000: http://tinyurl.com/3u6obdx
JDM B16A w/AC
My daily driver: http://tiny.cc/3bdut
K3 GSXR 1000: http://tinyurl.com/3u6obdx