Civic EG

Posted: **Wed Oct 12, 2011 11:00 pm**

Can anyone let me know how to route cable(s) from engine bay to cabin near the kick panel for car alarm and amplifier installation? How to open the extra hole(s) on the firewall which is plugged with a rubber plug? I do not want to run these wires thru the main wiring harness on the driver's or passenger's side. If anyone has a picture, I would really appreciate. I have a 1993 honda civic DX.

Thank you for all the help.

Posted: **Thu Oct 13, 2011 12:20 am**

Just cut a slit in the rubber plug with a razor blade to run the wire through.

Posted: **Fri Oct 14, 2011 5:17 pm**

also easier to tape the wires to a big ziptie/ coat hanger to fish em through

Civic EG

How to route cable(s) from engine bay to cabin for car alarm

How to route cable(s) from engine bay to cabin for car alarm