Page 1 of 1
Amp. Question !
Posted:
Tue Jan 19, 2010 2:31 pmby J'95
Hope someone can help me. Every time i connect my amp to 12v (battery)
big spark and blows the fuse and i know there is ground connected to the amp but wtf !!
Posted:
Tue Jan 19, 2010 3:01 pmby edcortez9
theres a shortage in between the amp and the power wires you need to follow the power wires cuz it might be spliced or a srew might have pinched it and ground can easily touch it and cause a shortage
Posted:
Tue Jan 19, 2010 4:30 pmby J'95
I followed the power wire all the way to the amp's board, looks ok to me but one thing i noticed was there is power in the ground slot...This amp is freid i think.
Posted:
Tue Jan 19, 2010 8:11 pmby edcortez9
yeah its fried but if thats the case you still ahev hope check the fuses on the amp change if the pop again then you need a new amp bro..
Posted:
Tue Jan 19, 2010 9:04 pmby J'95
Thanks for the help, we tried ...Guess we're going shopping !!
Posted:
Sun Jan 24, 2010 2:06 amby suspendedHatch
Reversed power and ground...
Some things are best left to professionals. Labor is cheaper than replacing equipment.