Page 1 of 1
foglights on with high beams
Posted:
Tue May 19, 2009 5:23 pmby suprame
so i have aftermarket foglights with two pigtails (+,-) and wanted to hook it up so my fogs come on only when i have my high beams on. just wondering how i could go about hooking that up, is there a wire in the headlight harness i could tap into? and could i just ground the (-) any advice would be appreciated thanks
Posted:
Wed May 20, 2009 4:05 amby suprame
alright so i figured this much, i can plug the (+) into high beams fuse. but can i just ground the lights to metal, or do i ground it to something else?
Posted:
Wed May 20, 2009 4:31 amby DontHateonEG8
yeah, just ground it to the metal. make sure its clean (sand the frame down untill you see the bare metal).
Posted:
Thu May 21, 2009 10:16 pmby suprame
alright so i did this, and when grounging to metal my fogs come on all the time. does anyone know how i can hook it up so they just come on with the high beams?
Posted:
Fri May 22, 2009 12:48 amby dawg316
connect the poitive to the highbeam wire only. cant tell you which on it is off the top of my head. but you can determin this by using a test light and finding out wire turns 12v when the highbeams are turned on.