Civic EG

i just finished installing the harness and fogs..
my problem is there are 3 colored wires
goin to the switch,,
red- (obviously goin to the harness? it has a partner connector)
2yellow- ?? (female flat pug terminal)
blue- ?? (with the half ring terminal)

someone help!
im just assuming..??!! that both remaining wires one
should be on the accesories and
the other on the connection where park lights are
connected..

thanks!!!

hmmm this is a pickle.... i'd have to actully see where the wires are hooked up to figure this one... im sure one of them is for the acc.... just dunno which one..

i havnt hook them up yet..

i just lay all the wires and harness plus the
fogs are alreadt in place..
i alreadt tested them out its working..

its just this wires goin inside that im getting confused..
which is which,, coz from a basic fog or any accesory
light,, one should be direct on contact and the other on the switch.. i dnt wanna make a mistake, im
just getting opinions from you gurus there who
alreay installed this fogs..

thanks!!

hey man i just got my Foglights in today and i only have a red, black, and yellow wire :S

i figured it out..
i tapped it to the park light harness
so i can use the fogs and park light at the same time..
it cant be used if the parklights isnt ON

send me or post pics here on
how did you place the bracket on the back of the bumper
how/what to cut..

thanks!!

i have the same fogs but i cant get mine to work. what color wire was that wire for the parking lights?

There is grooves on the inside part of the bumper... u just cut the lines... then bolt the lights in.... heres a pic

-EJ1- COUPE wrote:i have the same fogs but i cant get mine to work. what color wire was that wire for the parking lights?

what colors are your wire?
from what ive seen there are like different
wiring done on this cheap fogs..it might just depends
on the manufacturer on what designs are they gonna use..

thats why they note:
needs professional installation........etc.