Page 1 of 1

How to install push button start ????

PostPosted: Wed Sep 17, 2008 2:56 am
by KRYSTED9354
ok, i found a good deal for a BRAND NEW honda OEM s2000 Red push start button, and i want to install it in the spot were the mirror control square is on the civic eg dash board, does anybody have a DIY or pictures etc on how to make a civic manual push button start ? thanks

PostPosted: Wed Sep 17, 2008 10:31 pm
by Method
don;t you work in a shop? you don't know which wires to use?

PostPosted: Wed Sep 17, 2008 11:20 pm
by KRYSTED9354
no my question is how to wire up so it will no have problems i know what wires there wires, but u have to install a jumper which i DONT know how to, the jumper is so u don't have a electric problem because of the key in clutch, thanks for the help buddy !@

PostPosted: Wed Sep 17, 2008 11:21 pm
by KRYSTED9354
Method wrote:don;t you work in a shop? you don't know which wires to use?
-----
-----------------------------------------------------


:? 1 question, do u think if someone works in a shop and or owns one they know everything ?? NO, they don't, that's why im asking.

PostPosted: Wed Sep 17, 2008 11:25 pm
by york62
KRYSTED9354 wrote:
Method wrote:don;t you work in a shop? you don't know which wires to use?
-----
-----------------------------------------------------


:? 1 question, do u think if someone works in a shop and or owns one they know everything ?? NO, they don't, that's why im asking.


meow

PostPosted: Thu Sep 18, 2008 12:49 am
by Method
KRYSTED9354 wrote:
Method wrote:don;t you work in a shop? you don't know which wires to use?
-----
-----------------------------------------------------


:? 1 question, do u think if someone works in a shop and or owns one they know everything ?? NO, they don't, that's why im asking.


if you own a shop, you should. you ask alot of questions for "owning" a shop.

PostPosted: Thu Sep 18, 2008 1:18 am
by KRYSTED9354
Method wrote:
KRYSTED9354 wrote:
Method wrote:don;t you work in a shop? you don't know which wires to use?
-----
-----------------------------------------------------


:? 1 question, do u think if someone works in a shop and or owns one they know everything ?? NO, they don't, that's why im asking.


if you own a shop, you should. you ask alot of questions for "owning" a shop.+ im dumb so i dont know

-------------------------------------------------------------------------
Ok, well u find me a person that knows everything and own and let alone works at a shop, and 2 i have read some of your replies and they are all about bragging, so please if u don't have any info to say then stay out of my posts, thank you sir

PostPosted: Thu Sep 18, 2008 1:35 am
by joba356
...bump

PostPosted: Thu Sep 18, 2008 1:37 am
by KRYSTED9354
joba356 wrote:...bump

-------------------------------------------

Ok i c instead of a jumper just throw in a relay, THANKS BRO !!!


THANKS ALOT !! :thumb: :thumb: :thumb:

PostPosted: Thu Sep 18, 2008 1:41 am
by Method
i know a few people who know everything. ones my boss. and of course i know everything. my posts don't say sh!t about bragging about anything. your 16. im calling bs on you owning a shop, you problably just work there. im sure you've got a few honda manauls kicking around, open a book.

PostPosted: Thu Sep 18, 2008 1:44 am
by KRYSTED9354
I don't own a shop, its a FAMILY SHOP, owned by my GRANDFATHER, and its him and me that are there, and then at the body shop HE owns he has me him and his close friend working there, he owns it, i never stated i won it, yes its BS i don't own a shop its my grandfathers just im there as much as him, i NEVER stated i did, thanks

PostPosted: Thu Sep 18, 2008 11:08 am
by Method
http://www.civic-eg.com/viewtopic.php?p ... ght=#69348

read your first line. get your stories straight.

PostPosted: Thu Sep 18, 2008 12:05 pm
by CivicTypeR
What a dumbass :lol:

PostPosted: Thu Sep 18, 2008 6:07 pm
by ohDirka
Quit Bitching like old hags. This thread was high-jacked for some stupid arguing. There is no reasonable information in here making it a pointless thread. If someone were trying to find information on putting a S2000 push start in an EG there is no information on how to do it here. So I'm locking the thread and possibly deleting it.

People come here looking for answers to questions. If they were to search this then they would be wasting time reading it. :x