Civic EG

Stylish Groung Wire:


Materials:

1.Flexible hose
2.Wires (stranded, both ends stripped by 1”)
3.Round end terminals
4.Pliers
5.Cutter
6.Hammer

Procedure:
1.Strip the metal end of the flexible hose. ( Do it on both ends)



2.Cut the rubber inside the metal braid about 1“( Do it on both ends)



3.Insert the wire inside the flexible hose.
[/img]

4.Flattened the hose using


5.Crimp the metal braid using the pliers on both ends


6.And your finish with your “friendship bracelet" I mean GROUND WIRE.


End product

I just used 25mm² audio cable for chassis to tranny, and 18mm² audio cable for valve cover to chassis, soldered all ends to the crimps, but I guess this works as well... good write up!