ECU, Wiring, Sensors
By ottofalcon
#341100 Hey guys!

I installed an Avital 3100 alarm and I'm having trouble, when i activate the alarm it doesnt detect when I open the doors and the alarm doesnt activate(Zone 3 Fault). I wired everything up the way the tutorial at "causeforalarm" and the alarm manual explains. But I cant get this to work. If anybody has a fix or a solution I would really apreciate it.


I found the problem, at "causeforalarm" the wiring chart for the door trigger (-) mentions conecting the green h1/5 wire to the dark green/red wire on the apillar, this wire always has ground and can't be used, you need to use the LIGHT GREEN wire that runs parallel to this one for the alarm wiring. Otherwise you will get a zone 3 fault.
Last edited by ottofalcon on Sat Jan 11, 2014 12:50 pm, edited 1 time in total.
By ottofalcon
#341101 Btw its a 94 coupe ex!