Help identifying a Harness

ECU, Wiring, Sensors
 Reply
User avatar

By asianrob
- Tue Jul 17, 2012 8:26 pm #311268
EGCiviCKid wrote:Sweet so no need to wire vtec as im plugging a sir into vti harness..just the o2 sensor?


was your car originally Vtec?
User avatar

By asianrob
- Wed Jul 18, 2012 6:28 pm #311391
EGCiviCKid wrote:Na non vtec dpfi obd0 LSi


k, you'll have to wire it for vtec and anything else it will need. from the ecu to the shock tower.


and since your Dual point fuel injection, you'll have to do a little bit more wiring, or change over interior harness from a car that had multipoint fuel injection.
User avatar

By asianrob
- Thu Jul 19, 2012 9:40 am #311477
EGCiviCKid wrote:Yer I have already swapped out that harness and replaced with obd1 sir loom


ah cool yea then everything should be plug in play lol i though you still had the original harness in.
User avatar

By asianrob
- Fri Jul 20, 2012 2:02 am #311522 hmm o2 should be fine. you can refer to those links if needed but everything should work out.
 Reply
Return to Chassis - Electrical