ECU, Wiring, Sensors
User avatar
By lunaticracer21
#291344 I just did a swap for my friend the car is a 95 eg hatch si we got it going and now the only thing that works is the rpm's..... the gauges don't work turn signals don't work on the cluster you can here it clicking but won't light up on the cluster.... but they work on the outside of the car but they blink fast??????....the gas gauge won't work and nether will temp gauge help......
By ej0470114
#291396 cluster worked perfict before the swap?...... either way check ur fuses and harness grounds .......
User avatar
By lunaticracer21
#291415 Fuse's are fine same as grounds I don't know what else it could be
User avatar
By lunaticracer21
#291432 it was just working fine I took out the cluster every thing looks fine
User avatar
By lunaticracer21
#291973 I never took out the dash but ill check it maybe it went bad
By bks84
#292259
teal_dx wrote:Did you plug the hazard lights switch back in after taking the dash apart?

Not having that plugged in makes the turn signals not work.


He said they work on the outside of the car and you can hear them click...
User avatar
By ALLMPGcivic803
#292270 dirty pins on your connectors possibly or loose pins or connectors or possibly the cluster might have gone bad but check your pins and connectors
User avatar
By lunaticracer21
#292388 I can hear it clicking fast and the turn signals are working but the blink fast and they look dim....I checked all the ground wires and there fine don't know what else it could be