Page 1 of 1
how to fix code 15?
Posted:
Sun Jan 08, 2012 2:49 amby 92hatchie
sup fellas its been a while! ive have started a new project a ej2!
well im in need of help, my hatch is throwing a code 15? (ignition output signal) i have no clue what it might be!!! any help will be appreciated!
Posted:
Sun Jan 08, 2012 2:54 amby Hatch-O-Doom
I did a bit trolling around for you, and from what people are saying replace the dizzy.
but thats just my .02c
Posted:
Sun Jan 08, 2012 2:59 amby 92hatchie
thnx bro imma try dat first thing in the morning
Posted:
Sun Jan 08, 2012 3:07 amby Hatch-O-Doom
408eg6 wrote:thnx bro imma try dat first thing in the morning
No problem... I am not sure if this will fix it, but thats what other people were doin... I have never had this issue.
Posted:
Sun Jan 08, 2012 5:24 amby 92hatchie
thanks ill put on anopther dizzy see if it solves the issue
Posted:
Fri Jan 13, 2012 5:13 amby 92hatchie
im still having trouble fixing this issue!!! FML my car cranks but doesnt start!!! i need help!
Posted:
Fri Jan 13, 2012 6:24 amby 92civic_vx
check the wiring to the dizzy, alot of the time it is a bad connection in the wire. check the connectors at the dizzy and strut tower. hope you get it running again
Posted:
Fri Jan 13, 2012 8:01 amby Ecc0
Have just fixed my mates EK D16z6 with the same problem.
Check fuses 24 and 31 and also e/i module fuse in the engine bay as this is where I found the problem with his
Posted:
Fri Jan 13, 2012 8:42 amby 92hatchie
Thnx man I'll try dat in the am
Posted:
Fri Jan 13, 2012 1:28 pmby Apexracing
let us all know
Posted:
Sun Jan 15, 2012 6:52 amby 92hatchie
i still have the problem.. i swapped out the coil, checked all the fuses and connections!!! n i still cant fix it