ECU, Wiring, Sensors
User avatar
By 92hatchie
#288904 sup fellas its been a while! ive have started a new project a ej2!
well im in need of help, my hatch is throwing a code 15? (ignition output signal) i have no clue what it might be!!! any help will be appreciated!
User avatar
By Hatch-O-Doom
#288905 I did a bit trolling around for you, and from what people are saying replace the dizzy.
but thats just my .02c
User avatar
By 92hatchie
#288906 thnx bro imma try dat first thing in the morning
User avatar
By Hatch-O-Doom
#288908
408eg6 wrote:thnx bro imma try dat first thing in the morning


No problem... I am not sure if this will fix it, but thats what other people were doin... I have never had this issue.
User avatar
By 92hatchie
#288923 thanks ill put on anopther dizzy see if it solves the issue
User avatar
By 92hatchie
#289740 im still having trouble fixing this issue!!! FML my car cranks but doesnt start!!! i need help!
User avatar
By 92civic_vx
#289756 check the wiring to the dizzy, alot of the time it is a bad connection in the wire. check the connectors at the dizzy and strut tower. hope you get it running again
User avatar
By Ecc0
#289766 Have just fixed my mates EK D16z6 with the same problem.

Check fuses 24 and 31 and also e/i module fuse in the engine bay as this is where I found the problem with his
User avatar
By 92hatchie
#289774 Thnx man I'll try dat in the am
User avatar
By Apexracing
#289800 let us all know :thumb:
User avatar
By 92hatchie
#290068 i still have the problem.. i swapped out the coil, checked all the fuses and connections!!! n i still cant fix it