ECU, Wiring, Sensors
User avatar
By asianrob
#277701 alright time came to start my car for the first time.
so anyways to the point. im not getting power to the fuel pump (checked with circuit tester)

checked all the fuses in the engine bay, under dash, check the ECU its getting power,

checked all the grounds in the engine bay.

checked the under dash fuse box itself,

changed out the main relay


any ideas to throw at me?

if you need to know its a B20 Vtec setup with S300.
User avatar
By TrailerTrash
#277704 everything else work? ignition comes on, car cranks over, ect
User avatar
By asianrob
#277708
TrailerTrash wrote:everything else work? ignition comes on, car cranks over, ect


yup car tries to turn over, all lights come on

just not getting fuel/spark.
User avatar
By asianrob
#277722 could there be a ground or something inside the cabin i missed?
User avatar
By asianrob
#277815
RWMIII wrote:
lunaticracer21 wrote:are you running a resistor box injectors


why would he do that on a B20Vtec with Hondata?


X2

no i am not. i have RC injectors. i was also told running a resistor box could end up frying my ECU.
User avatar
By asianrob
#277932 alright so up date it was a bad fuel pump. now im not getting any spark. switch around a couple ignitors im thinking bad dizzy or bad CPK or a mixture of bad ignitors and coils etc..
User avatar
By asianrob
#278123 alright so now i have tried a Known working dizzy and still no spark. anyone else run into something like this?
User avatar
By lunaticracer21
#278138 use multimeter to check the fuses that powers the ecu i think there 3 brown fuse under the dash
User avatar
By asianrob
#278167 i went throught that process plenty of times lol.

the ACG, starter, ECU Fuses are still good.


ill check them again and will also try a different ecu.