Page 1 of 1
EG fog lights ???
Posted:
Wed Oct 05, 2011 11:21 pmby matt is (eg6)
does anyone know if you can tie into the negative and positive on your corner lights. that way every time you turn on your corner lights your fogs come on also? so you dont have to mess with the switch and fuses it runs strait from the bulbs to the wires on your corners..
Re: EG fog lights ???
Posted:
Wed Oct 05, 2011 11:34 pmby Gustavo
matt is (eg6) wrote:does anyone know if you can tie into the negative and positive on your corner lights. that way every time you turn on your corner lights your fogs come on also? so you dont have to mess with the switch and fuses it runs strait from the bulbs to the wires on your corners..
Theres a way to do it. Idk how but my friend has it setup like that.
Posted:
Wed Oct 05, 2011 11:52 pmby RWMIII
tap the positive from the fogs into the red wire on the corner light harness and just find a good ground for the fogs' on the core support.
Posted:
Thu Oct 06, 2011 12:01 amby Gustavo
RWMIII wrote:tap the positive from the fogs into the red wire on the corner light harness and just find a good ground for the fogs' on the core support.
I was gonna say that but i didn't wanna sound dumb. I figured it would work just how i have my fan hooked up 2 my corner lights. Everytime i turn my corner lights on my fan kicks on.
Posted:
Thu Oct 06, 2011 12:18 amby HungRealLow21
or you could just attach both of the wires straight to the corners like do the power to the red and the ground to the black easy fix lol
Posted:
Thu Oct 06, 2011 12:23 amby matt is (eg6)
I understand how to do it i was the one that suggested it... i was asking if it could handle it or if its a fire waiting to happen? they have relays and im not sure what will happen if i by pass those relays by just connecting to the corners
Posted:
Thu Oct 06, 2011 12:36 amby RWMIII
matt is (eg6) wrote:I understand how to do it i was the one that suggested it... i was asking if it could handle it or if its a fire waiting to happen? they have relays and im not sure what will happen if i by pass those relays by just connecting to the corners
It will be fine. This is how the guys with halo projectors run those rings.
Posted:
Thu Oct 06, 2011 12:46 amby blk92hb
in the steering column the fogs are on a white and red stripe wire, cut it and tap it on the solid white wire. then the fogs will work when you turn on the parking light with the switch on.
check out page 3 on my build page
Posted:
Thu Oct 06, 2011 1:21 amby matt is (eg6)
thanks