Ls swapped eg sedan
Posted: Tue Oct 04, 2011 3:20 amSo I need to know if I could run a p28 ecu on my ls (b18b1) motor. Would it do anything? I found a chipped one for 125 on craigslist and it's obd1 I believe as well as my car.
Page 1 of 1
Posted: Tue Oct 04, 2011 3:20 amPosted: Tue Oct 04, 2011 3:47 amyes, but get it chipped/setup for your motor. Or you will have issues. If not then just get an ls ecu.
Posted: Tue Oct 04, 2011 3:53 amWell i would have it re-tuned after installed.
Posted: Tue Oct 04, 2011 3:54 amTgEG wrote:Well i would have it re-tuned after installed.
Then go for it. The p28 is a good platform for future tuning capabilities.
Posted: Tue Oct 04, 2011 4:20 amAlright thanks! And can i run two step launch control on all motor build? Sorry if I'm asking dumb questions I'm only 17 and have 0 knowledge on ECUs or engine management
step on all motor? and how good is chrome chipping?
Posted: Wed Oct 05, 2011 3:45 pmSo I'm looking at buying a p28 chrome chipped with two step launch control for my ls swap. Pro's and Cons? Opinion?
Posted: Wed Oct 05, 2011 3:57 pmIf you're on a budget, then CROME is alright (it's free software) It's not the best, but it's probably the best for free. (Neptune is free too I believe) I'd check to see what your tuner can work with first. Some tuners don't like to use it.
Posted: Thu Oct 06, 2011 3:39 pmWhere can I find Neptune components?
Posted: Thu Oct 06, 2011 5:37 pm