Civic-EG.com Forum 3.3.1

- Tue Oct 04, 2011 3:20 am #276093 So I need to know if I could run a p28 ecu on my ls (b18b1) motor. Would it do anything? I found a chipped one for 125 on craigslist and it's obd1 I believe as well as my car.

- Tue Oct 04, 2011 3:47 am #276101 yes, but get it chipped/setup for your motor. Or you will have issues. If not then just get an ls ecu.

Coupe Crew #16
DC2: http://www.civic-eg.com/viewtopic.php?t=21051

- Tue Oct 04, 2011 3:53 am #276105 Well i would have it re-tuned after installed.

- Tue Oct 04, 2011 3:54 am #276106

Well i would have it re-tuned after installed.

Then go for it. The p28 is a good platform for future tuning capabilities.

Coupe Crew #16
DC2: http://www.civic-eg.com/viewtopic.php?t=21051

- Tue Oct 04, 2011 4:20 am #276110 Alright thanks! And can i run two step launch control on all motor build? Sorry if I'm asking dumb questions I'm only 17 and have 0 knowledge on ECUs or engine management

- Wed Oct 05, 2011 3:45 pm #276337 So I'm looking at buying a p28 chrome chipped with two step launch control for my ls swap. Pro's and Cons? Opinion?

[teal_dx]

- Wed Oct 05, 2011 3:57 pm #276339 If you're on a budget, then CROME is alright (it's free software) It's not the best, but it's probably the best for free. (Neptune is free too I believe) I'd check to see what your tuner can work with first. Some tuners don't like to use it.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Thu Oct 06, 2011 3:39 pm #276504 Where can I find Neptune components?

- Thu Oct 06, 2011 5:37 pm #276521

Where can I find Neptune components?

http://www.hrtuning.com/

Coupe Crew #16
DC2: http://www.civic-eg.com/viewtopic.php?t=21051