Civic EG

Ok i was at the junk yard and found a like 1976 accord
And it had this mint analog clock and i was lovin it
But i need help with the wiring
Pics:



Basically red and black is for the light and the white is the clock function
Any help before i chop chop chop my wires

EG clock wires:

white/blue: battery memory

Yellow: ignition

Red/Black: dimmer

Black: ground

Good info thanks
But how do i connect this 4 wired to 3

by the looks of it

the white is the ignition
the red is the battery/ memory
the black is ground

and the light just run the power to the dimmer switch wire and ground the black side to a ground

and post pics

no fellas, i dont think ignition wire will make sense here.
the analog clock needs to run from a constant 12V, the ignition wire on our clocks makes sense becuase thats what triggers the display to come on.

I would use the +12V, ground, and dimmer wires, or you can put the ignition wire on so your clock light up everytime you turn on the car

DontHateonEG8 wrote:no fellas, i dont think ignition wire will make sense here.
the analog clock needs to run from a constant 12V, the ignition wire on our clocks makes sense becuase thats what triggers the display to come on.

I would use the +12V, ground, and dimmer wires, or you can put the ignition wire on so your clock light up everytime you turn on the car

x2

Im liking the last post
Im gonna attempt it i just wanna get another cluster bezel so i dont fu*k mine up when i cut it
I will post pics after its all done + progress

Honda_creeper91 wrote:Im liking the last post
Im gonna attempt it i just wanna get another cluster bezel so i dont fu*k mine up when i cut it
I will post pics after its all done + progress

phuck yah!