Civic-EG.com Forum 3.3.1

- Sun Oct 02, 2011 3:07 am #275698 Ok i was at the junk yard and found a like 1976 accord
And it had this mint analog clock and i was lovin it
But i need help with the wiring
Pics:



Basically red and black is for the light and the white is the clock function
Any help before i chop chop chop my wires

- Sun Oct 02, 2011 3:50 am #275709 EG clock wires:

white/blue: battery memory

Yellow: ignition

Red/Black: dimmer

Black: ground

Coupe Crew #16
DC2: http://www.civic-eg.com/viewtopic.php?t=21051

- Sun Oct 02, 2011 2:38 pm #275747 Good info thanks
But how do i connect this 4 wired to 3

[Ajax1989]

- Sun Oct 02, 2011 3:46 pm #275754 by the looks of it

the white is the ignition
the red is the battery/ memory
the black is ground

and the light just run the power to the dimmer switch wire and ground the black side to a ground

- Sun Oct 02, 2011 7:01 pm #275787 and post pics

95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little

- Sun Oct 02, 2011 7:08 pm #275788 no fellas, i dont think ignition wire will make sense here.
the analog clock needs to run from a constant 12V, the ignition wire on our clocks makes sense becuase thats what triggers the display to come on.

I would use the +12V, ground, and dimmer wires, or you can put the ignition wire on so your clock light up everytime you turn on the car

Engine Parts For Sale Thread

- Sun Oct 02, 2011 8:31 pm #275795

no fellas, i dont think ignition wire will make sense here.
the analog clock needs to run from a constant 12V, the ignition wire on our clocks makes sense becuase thats what triggers the display to come on.

I would use the +12V, ground, and dimmer wires, or you can put the ignition wire on so your clock light up everytime you turn on the car

x2

Coupe Crew #16
DC2: http://www.civic-eg.com/viewtopic.php?t=21051

- Tue Oct 04, 2011 7:38 pm #276199 Im liking the last post
Im gonna attempt it i just wanna get another cluster bezel so i dont fu*k mine up when i cut it
I will post pics after its all done + progress

- Tue Oct 04, 2011 10:24 pm #276214

Im liking the last post
Im gonna attempt it i just wanna get another cluster bezel so i dont fu*k mine up when i cut it
I will post pics after its all done + progress

phuck yah!

Engine Parts For Sale Thread