Civic EG

Ok when i bought my car everything worked fine the power windows/locks all that
So one day i remove my front driver side door panel bcuz my inner door handle was loose so while im in it i fix the handle and the the metal arm for my lock tab bends a little and i bend it back and reassemble everything and hit my locks and nothing no noise like its trying to work or anything
The fuse is good and all so im clueless
*****NOTE: idk if any of your car do this but in my car and i remember my friends dc teg and my cousins ek, the driver door lock will NOT lock just by pushing it down, i have to pull the door handle and then it will lock


Any help is appreciated thanks
I want my power lox back

yes the driver door does that lol its common .. are you sure you plugged the door switch back ?

Yea everythings plugged i double checked yesterday

maybe your switch went out ?? If you didnt touch anything else thats all I can think of at the moment lol .

you said all fuses are good and you had to bend the rod back..
did you damage the arm for your lock while doing that ? inspect that to

You are pulling your handle and pressing lock switch correct ?

do you have a friend that could let you use his switch to see if its that . If so try that and we will go from there .

Im starting to think it is the switch that went out
And yea when the locks worke i would have to pull the handle and then do the switch for the driver door to lock

Try switching it and if that doesnt work then something else got messed up when you bent the arm maybe

Do all your other electrical powers work? such as power mirrors and windows?

x2 ^^

Something might have shorted