- Wed Aug 03, 2011 12:38 pm
#266020
Hey guys whats going on . I got a electrical promblem thats a pain . So quick run through . My car is a 94 civic , it has a built b20v in it . Motor turns over strong but gets no SPARK but does get fuel . I went through everything that would cause the car not to get spark , plugs , wires , BRANDNEW distributer , grounds are good , thermestat ground is good , fuses are all good , my sensors are all there . I plugged in my s300 to my laptop and 3 codescame up .
code 10 . IAT-Intake air temperature
code 20 . ELD-electrical load detector
code 21 . VTEC-Vtec spool
I know none of these code would stop my car from getting spark. Now listen to this . The Yellow/Black wire on the distributer gets power , i opened up the cap and tsted the coil for power , its getting it . now why dosent the motor get spark ? considering that thye coil gets power ?
code 10 . IAT-Intake air temperature
code 20 . ELD-electrical load detector
code 21 . VTEC-Vtec spool
I know none of these code would stop my car from getting spark. Now listen to this . The Yellow/Black wire on the distributer gets power , i opened up the cap and tsted the coil for power , its getting it . now why dosent the motor get spark ? considering that thye coil gets power ?