Civic EG

ok now i found the 4 wires that go to the injectors, 1 wire had 12 volts to it and the other 3 left have nothing... were those 3 wires suppose to be getting the 12 volts too?? or can i just block off those three wires and hook that one wire with 12v to the red wire on the resistor box? or do i connect the 12v wire to the other 3 wires thennn connect it to the red resistor wire?

The 4 red/black wires coming from injector resistor box goes to each injector.(One per injector).

Here's another diagram:


and a link: http://civic-eg.com/viewtopic.php?t=10140 if you don't want to cut any of your factory wiring.

I understand that part, I just have 4 wires left, and one has 12v and the other 3 donot, do I connect all 4 together then wire that to the last wire comming off of the reistor or do I just wire the 12? Wire to the last resistor wire and just tape off the other 3?